LATICRETE® 9235 Waterproofing
Membrane
DESCRIPTION:
LATICRETE® 9235
Waterproofing Membrane is a thin,
load-bearing waterproofing designed specifically for
the special requirements of ceramic tile, stone and
brick installations.
A self-curing liquid rubber polymer and a
reinforcing fabric
are quickly roller applied to form a flexible,
seamless waterproof membrane that bonds to a wide
variety of substrates.
ADVANTAGES: A
component of the Laticrete Lifetime Residential
Warranty and the Laticrete 10 Years system
Warranties*.
Fully compatible
with all LATICRETE and LATAPOXY tile installation
materials. Cleans up with water while fresh. Makes
your installations stand the test of time.
Inhibits stain causing mold and mildew growth with
Microban® antimicrobial product protection. Interior
and exterior use.
- NO SOLVENTS
- MEETS ANSI
A118.10
- Accepted by
IAPMO and ICC for Waterproof
Membranes and Shower Pans
ASTM C627 Rated “EXTRA HEAVY SERVICE”
Private Residence Pool Bar, Tucson, AZ;
Contractor: Conway Tile |
LATICRETE 9235 Waterproofing Membrane Floor
Application
PACKAGING:
FULL UNIT - 6
U.S. gallon (23 E) pail of Liquid Rubber Latex and
one carton of Reinforcing Fabric and Flashing Roll;
36 units per pallet.
MINI UNIT - 2
U.S. gallon (7.6 E) jug of Liquid Rubber Latex and
Reinforcing Fabric; 27 units per pallet.
COVERAGE:
Approximately 300
ft2 (28 m2) per Full Unit; Approximately 75 ft2 (7
m2) per Mini Unit
LATICRETE 9235 Waterproofing Membrane is SO EASY TO
USE
LATICRETE 9235
Waterproofing Membrane is applied with a paint
roller and utility knife, cures in just hours, and
provides a permanent waterproof base for your
ceramic tile in pools, showers and spas.
When the membrane
is cured, install the ceramic tile using a LATICRETE
Latex Thin-Set Mortar or LATAPOXY® 300 Epoxy
Adhesive.
Just comb onto the membrane with a notched trowel
and place new tile.
After installation is firm, use LATAPOXY SP-100
Stainless Grout for Floors N' Walls or LATICRETE
SpectraLOCK™ Grout (Patent Pending) to complete
the job. Complete directions are supplied in
package. |
LATAPOXY® 24hr HydroProofing
DESCRIPTION:
LATAPOXY® 24hr
HydroProofing is an epoxy based, 3 component, trowel
applied, waterproof vapor barrier membrane.
It is specifically
designed to be used under ceramic tile, stone or
brick for rapid installations which require flood
testing in 24 hours.
LATAPOXY 24hr
HydroProofing is flexible, easy to apply and will
allow for rapid installations.
ADVANTAGES:
A component of the Laticrete 10 Year System
Warranty*.
Allows for flood
testing in 24 hours @ 70°F (21°C). No fabric
required at coves, drains or base, adheres to pipes
and drains, is fast-curing and extremely flexible.
PACKAGING:
3.5 gallon (13.2 E)
pail with 2 Part A 1.4 lbs. (0.65 kg), 2 Part B 1.15
lbs. (0.5 kg), and one Part C 11 lbs. (5.5 kg),
48 units per pallet COVERAGE: Approximately 45 ft'
per unit (4.2 m˛)
Click Links Below For Our Products
Unicorp Sendirian Berhad
Lot 66,
Beribi II Industrial Estate, B.S.B. BE1118
P.O. Box 620, Bandar Seri Begawan BS8671,
Brunei Darussalam Tel: 673-245 0450, 245
0500, 245 0998 Fax: 673-245 0999 E-mail:
unicorp@brunet.bn
or
unicorpbrunei@brunet.bn
Copyright © Unicorp Sendirian Berhad
All Rights Reserved 2005 |
LATICRETE 9235 Watertight Floor N' Wall
Waterproofing
LATICRETE Watertight Floor N'
Waterproofing
DESCRIPTION:
LATICRETE
Watertight Floor N' Wall Waterproofing is a easy to
use liquid rubber waterproofing designed for use
under ceramic tile and stone in wet areas such as
bathrooms, spas and kitchens.
Protects substrates
behind the tile from water damage and inhibits stain
causing mold and mildew growth with Microban®
antimicrobial product protection.
ADVANTAGES:
Easy to install,
applies like paint.
Is water cleanable while fresh,
low odor. Inhibits stain causing mold and mildew
growth with Microban® antimicrobial product
protection.
PACKAGING:
A component of the Laticrete 10 Year System
Warranty*.
2 U.S. gallon (7.6) container with 75 ft2 (7 m2) of reinforcing
fabric per carton; 48 cartons per pallet 5 U.S.
gallons (19) pail with 6" x 75' (15 cm x 27 m) of
reinforcing fabric per carton; 36 pails per pallet
COVERAGE:
Approximately 60-70
ft2 (5.6-6.5 m2) per 1 gallon (3.8) pail
Approximately 150-175 ft' (14-16 m2) per 5 gallon
(19) pail |
