|
BIO DERUST
OVERVIEW |
|
Bio
Derust is a cleaning liquid that's been
developed to remove rust and rust
residues on most metal and steel
surfaces.
|
|
MAIN FEATURES |
-
Neutral pH.
-
Non corrosive.
-
Bio-degradable.
|
|
TECHNICAL BENEFITS |
-
Contains no acids.
-
If applied correctly the product
can be used safely on: aluminum, copper, ...
-
Due to its formulation Bio Derust
leaves a protective layer on the surface after the treatment to prevent it from
rusting again.
|
|
APPLICATION
INFORMATION |
-
Degrease the surface and remove the
dirt before starting the treatment.
-
Bio Derust has to be used undiluted.
-
Rust shaping: Immerse the object in
the product, wait 20 — 30 minutes
and then rinse thoroughly with
water.
-
When the rust shaping is heavy you
have to immerse the object between
10 — 24 hours.
-
We advise you to shortly immerse the
object after the treatment to
prevent it from rusting again. Let
it dry to the air.
Om
nieuwe roestvorming te voorkomen raden
wij aan om na de behandeling het
voorwerp kortstondig onder te dompelen
in Bio Rust en aan de lucht te laten
drogen.
|
|
PHYSICAL AND CHEMICAL
PROPERTIES HS Code – 34
02 1300 |
|
pH
- 6.0
Relative density/20 degrees
C - 1.063
Flash point, degrees
C - /
Solubility in
water
- completely soluble
|
|
PRECAUTIONS |
|
It is
recommended that the surfaces to be
cleaned or treated should initially be
tested with a small amount of the
selected chemical in a non-critical
area, to determine if any adverse
reaction takes place.
Avoid skin contact and wear chemical
proof gloves.
|
|
SAFETY |
|
Refer
appropriate MSDS before handling and
use.
|
| PACKAGING SIZES |
- 25 litre containers x 24 on one Euro pallet.
- 210 litre drums x 2 on one Euro pallet.
- 1000 litre BC container.
-
20,000 litre ISO tank.
|
| DISCLAIMER |
This chemical product, its labelling and the
information contained on the Product Information Sheet and MSDS, including any
directions and recommendations for its use, are based on extensive research and
experience.
The information provided however does not
exempt the customer from examining the chemical product and its directions for
use, to determine that it is suitable for the purpose for which it is intended. |
