Cemplas
Liquid Mortar Plasticiser
Conforms to BS 4887 Part 1 : 1986

DESCRIPTION

Cemplas is a chloride-free liquid mortar plasliciser.
It is a resin-based air-entraining agent that improves the workability of cement mixes and providing frost-resistance after-set Cemplas is superior to using rime in cement mixes as it reduces "rime bloom" and efflorescence.

Cemplas is recommended for use in brick-laying, pointing mortar, rendering, plastering and backing coat.

TYPICAL PROPERTIES

  • Improves plasticity and increases ease of application.
  • Reduces rime bloom.
  • Maintains optimum air-entrainment even in the case of over-mixing.
  • Enables the mortar to accommodate accidental over-dosage.
  • Economy of use as compared with rime, induced cement mixes.
  • Reduces glazing.
  • Increases frost resistant property of the set mortar.
  • Improves durability of the mortar.
  • Reduces the water' content of the mortar.

SPECIFYING

"Cemplas" should be specified by name and used as per application procedures below.

Click Links Below For Our Products
Cementone Cemgrout GPA
Cementone Cemgrout NS
Cementone Prufe-it
Cementone Superplasticiser EB821-R
Marlease
Cementone No. 2
Cempatch -118
Cementone Paveseal
Mortar Clean
Superbond SBR
Powder Tile Adhesive
Expagate Standard
Cemplas
Conret
Expagate Spray
Superplastticiser EB 821-P
Cemcure EB 286 Clear
Cemcure EB 286 White
Cemcure EB 559 Clear
Cemcure EB 559 White
Conspeed
Cementone Hardflor-NOM Coloured
Cementone Hardflor-NOM
Cementone Hardflor-NM
Cementone Hardflor-NM Coloured

APPLICATION PROCEDURES

  • Reference should be made to the appropriate British Standards and Codes of Practice to ensure correct material selection and adoption of satisfactory procedures in producing: the mortar. General plastering work.
  1. Add Cemplas to the gauging water at the rate of 250 to 500 ml per 100 kg of cement, then pour to the dry mixed cement mortar.
  2. Mix thoroughly to ensure maximum plasticity.
  3. For bricklaying, the strength of the selected mix should approximate the brick.
  4. For internal & sheltered external renderings, a mortar mix of 1 : 6 + Cemplas is recommended.
  5. For exposed external rendering, a mortar mix of 1 :41/2 + Cemplas is recommended.

Comparison between equivalent mixes using lime and Cemplas

Lime induced mortar

Cemplas induced mortar

1:1/4:3 cement : rime : sand 1 :41/2 cement : sand +Cemplas
1:1:6 cement : rime : sand 1:6 cement : sand + Cemplas
1:2:9 cement : lime : sand 1 : 8 cement : sand + Cemplas

PRODUCT DATA

Physical Appearance Dark brown liquid
PH Value 12 ± 0.5.
Relative Density 1.05 ± 0.05.
Foam Stability  1 hour.
Chloride Ion Content Less than 0.01 % w/w.
Dosage 250 to 500 ml per 100 kg cement.
Packing 25 litre & 210 We drums.
Storage Avoid extreme temperature and direct sunlight.
Shelf Life 2 years if unopened.
Flash Point Non-flammable.

CLEANING OF EQUIPMENT

Clean tools and other equipment with water immediately after use.

Unicorp Sendirian Berhad Lot 66, Beribi II Industrial Estate,
B.S.B. BE1118 P.O. Box 620, Bandar Seri Begawan BS8671,
Brunei Darussalam
Tel: 673-245 0450, 245 0500, 245 0998
Fax: 673-245 0999 E-mail: unicorp@brunet.bn or unicorpbrunei@brunet.bn
Copyright © Unicorp Sendirian Berhad All Rights Reserved 2005

"> 250 to 500 ml per 100 kg cement. Packing 25 litre & 210 We drums. Storage Avoid extreme temperature and direct sunlight. Shelf Life 2 years if unopened. Flash Point Non-flammable.

CLEANING OF EQUIPMENT

Clean tools and other equipment with water immediately after use.

Unicorp Sendirian Berhad Lot 66, Beribi II Industrial Estate,
B.S.B. BE1118 P.O. Box 620, Bandar Seri Begawan BS8671,
Brunei Darussalam
Tel: 673-245 0450, 245 0500, 245 0998
Fax: 673-245 0999 E-mail: unicorp@brunet.bn or unicorpbrunei@brunet.bn
Copyright © Unicorp Sendirian Berhad All Rights Reserved 2005