Cemcure EB 286
Clear is an efficient water based curing
compound specially formulated using a water
based medium.
The use of
water-based medium ensures the production
of a efficient low cost curing system that
reduces toxicity and eliminates the risk of fire
hazard.
Cemcure EB 286
Clear reacts with cement to form a rapid setting
and low permeability coating that retains the
appropriate amount of water required for
hydration and hence aids the curing of concrete.
TYPICAL PROPERTIES
Possesses water-based, non-toxic and
non-flammable properties.
Provides a highly cost effective
means of curing concrete.
Needs no removal of dried film as it
can act as a surface sealer for
subsequent decorative coating.
Improves abrasion resistance of the
concrete surface as Cemcure EB 286
Clear hardens the concrete surface.
Note:
Cemcure EB 286 Clear is not
recommended for use in temperatures
below 0°C.
SPECIFYING
"Cemcure
EB 286 Clear" should be specified by
name and used as per application
procedures below.
APPLICATION PROCEDURES
For horizontal surfaces
Apply Cemcure EB 286 Clear
evenly onto freshly placed
concrete with low pressure
pneumatic spraying system or
knapsack sprayer as soon as
the initial surface sheen
has disappeared from
concrete face (i.e. the
initial set of concrete).
Allow it to cure.
For vertical surfaces
Damp the concrete
surface with clean
water immediately
upon removal of
formwork.
Apply Cemcure EB 286
Clear evenly onto
the concrete surface
by roller, brush or
sparyer.
Cemcure EB 286 White
is an white
pigmented efficient
water based curing
compound specially
formulated using
a water based
medium.
The use of
water-based medium
ensures the
production
of a efficient low
cost curing system
that reduces
toxicity and
eliminates the risk
of fire hazard.
Cemcure EB 286
White reacts with
cement to form a
rapid setting and
low permeability
coating that retains
the appropriate
amount of wafer
required for
hydration and hence
aids the curing of
concrete.
Cemcure EB 286
White. dries to form
a solar reflective
film that increases
the water retention
capability and
curing efficiency.
TYPICAL PROPERTIES
Possesses
water-based,
non-toxic and
non-flammable
properties.
Provides a
highly cost
effective means
of curing
concrete.
Needs no removal
of dried film as
it can act as a
surface sealer
for subsequent
decorative
coating.
Improves
abrasion
resistance of
the concrete
surface as
Cemcure EB 286
White hardens
the concrete
surface.
Note:
Cemcure EB 286
White is not
recommended for
use in
temperatures
below 0°C.
SPECIFYING
"Cemcure
EB 286 White"
should be
specified by
name and used as
application
procedures
below.
APPLICATION
PROCEDURES
For
horizontal
surfaces
Apply
Cemcure EB
286 White
evenly onto
freshly
placed
concrete
with low
pressure
pneumatic
spraying
system or
knapsack
sprayer as
soon as the
initial
surface
sheen has
disappeared
from
concrete
face (i.e.
the initial
set of
concrete).
Allow it to
cure.
For vertical
surfaces
Damp the
concrete
surface with
clean water
immediately
upon removal
of formwork.
Apply
Cemcure EB
286 White
evenly onto
the concrete
surface with
roller,
brush or
sprayer.
Cemcure EB 559 Clear Concrete
Curing Membrane
Conforms to ASTM C156-89, ASTM C309:77 Type I Class
A
DESCRIPTION
Cemcure EB 559
Clear are emulsified milky white water-based curing
compound specially formulated to form an economical
and highly efficient curing membrane.
It helps to retain
moisture and water required for proper hydration of
freshly placed concrete in order to ensure optimal
strength development.
Cemcure EB 559
Clear curing membrane has a curing efficiency in
excess of more than 850 Cemcure EB 559 Clear is
suitable for use under high temperature conditions
but not recommended for use where the temperature is
below 5°C or 41 °F.
TYPICAL PROPERTIES
Possesses
non-toxic and non-flammable properties.
Provides an
economical and highly efficient concrete curing
system.
Enables the
production of hard, dust-free concrete surface.
Minimizes
shrinkage and crazing in concrete.
Ensures proper
strength development of concrete.
Not
recommended for use where the temperature is
below 5°C or 41 °F.
SPECIFYING
"Cemcure EB 559
Clear" should be specified by name and used as per
application procedures below.
APPLICATION
PROCEDURES
For horizontal surfaces
Apply Cemcure
EB 559 Clear evenly onto freshly placed concrete
with low pressure pneumatic spraying system or
knapsack sprayer as soon as the initial surface
sheen has disappeared from concrete surface
(i.e. the initial set of concrete).
Care must be
taken to ensure complete and
adequate coverage to substrate for optimum
performance.
Allow it to
cure.
For vertical surfaces
Damp the
concrete surface with clean water immediately
upon removal of formwork.
Apply Cemcure
EB 559 Clear evenly onto the concrete surface.
Care must be
taken to ensure complete and adequate coverage
to substrate for optimum performance.
Allow it to
cure.
Note
For subsequent
finishes over concrete surfaces treated with
Cemcure EB 559 Clear, it is important to ensure
the wax film is completely removed.
However the
membrane will starts disintegrating
approximately 30 days after application but may
varies depending on the degree of exposure to
weather and traffic as well as the thickness of
film.
Cemcure EB 559 White White
Pigmented Concrete Curing Membrane Conforms to ASTM
C 156-89, ASTM C309:77 Type II Class B
DESCRIPTION
Cemcure EB 559
White are emulsified milky white water-based curing
compound specially formulated to form an economical
and highly efficient curing membrane.
It helps to retain
moisture and water required for proper hydration of
freshly placed concrete in order to ensure optimal
strength development. Cemcure EB 559 White dries to
form a solar reflective membrane which increases the
curing efficiency to more than 85% Cemcure EB 559
White are suitable for use under high temperature
conditions but not recommended for use where the
temperature is below 5°C or 41 °F.
TYPICAL
PROPERTIES
Possesses
non-toxic and non-flammable properties.
Provides an
economical and highly efficient concrete curing
system.
Enables the
production of hard, dust-free concrete surface.
Minimizes
shrinkage and crazing in concrete.
Ensures proper
strength development of concrete.
Not
recommended for use where the temperature is
below 5°C or 41 °F.
SPECIFYING
"Cemcure EB 559
White" should be specified by name and used as per
application procedures below.
APPLICATION PROCEDURES
For horizontal surfaces
Apply Cemcure
EB 559 White evenly onto freshly placed concrete
with low pressure pneumatic spraying system or
knapsack sprayer as soon as the initial surface
water sheen has disappeared from the concrete
surface (ie. the initial set of concrete).
Care must be
taken to ensure complete and adequate coverage
to substrate for optimum performance.
Allow at least
7 days for the concrete to cure.
For vertical surfaces
Damp the
concrete surface with clean water immediately
upon removal of formwork.
Apply Cemcure
EB 559 White evenly onto the concrete surface.
Care must be
taken to ensure complete and adequate coverage
to substrate for optimum performance.
Allow at least
7 days for the concrete to cure.
Note:
For subsequent
finishes over concrete surfaces treated with
Cemcure EB 559 White, it is important to ensure
the wax film is completely removed.
However the
membrane will starts disintegrating
approximately 30 days after application but may
varies depending on the degree of exposure to
weather and traffic as well as the thickness of
film.
